BLACK BOX
V I D
E O
CABLES
It would be impossible to detail
all the cables we can supply you with. Best thing would be to call us and
discuss your requirements, as we can make just about anything - any length -
often any colour.
Whatever cables you ask for you
can be assured we only use the finest quality components. Every joint is
individually heat-shrunk and sleeved. And we never use cheap crimped
BNC's, but always clamp them.
OUR
CABLES ARE BUILT TO ENDURE AND PERFORM
Fed
up with BNC's that simply don't last? We have just starting using some
wonderful new Neutrik BNC plugs. OK, they cost a bit more, but they are
really built to last - they have a unique push/pull action, unlike the normal
twist action of a BNC, but they are still completely compatible with standard
BNC sockets. They feature a superb cable-grip, which is absolutely perfect
for our very high quality Van Damme coax cable. We think they are well
worth the little bit extra. Clients who are already lucky enough to have
the new Neutrik BNCs are over-the-moon with them!
A word of advice: people
often under-estimate the length of cable they require. You might think you
only need 8 inches, but you may be amazed to find you actually need more like 24
inches! So do measure before you order.
Listed below are just a few of our
standard cables, leads and connectors.
| POWER
LEADS |
| 001 |
XLR4M - XLR4F 12v |
2 metres |
£18 |
| 002 |
XLR4M - XLR4F curly |
|
£22 |
| 007 |
Time Code TX PP3 Clip Adaptor |
|
£25 |
| 008 |
HRS4M - HRS4M |
18" |
£35 |
| 009 |
Miniature Time Code RX power
lead |
|
£35 |
| 011 |
Hirose Y Lead (HRS4M - 2 x
HRS4F) |
|
£55 |
| 034 |
HRS4M - BP90 |
18" |
£23 |
| 035 |
HRS4M - XLR4M |
18" |
£25 |
| 108a |
HRS4M - HRS4M curly for Handy
Power Batt. |
|
£35 |
| MIXER
LEADS |
| 013 |
XLR7M - XLR7F |
10 metres |
£75 |
| 014 |
HRS10M - HRS10F curly
umbilical |
3 metres |
£75 |
| 018 |
HRS10M - HRS10F umbilical (inc
video) |
10 metres |
£80 |
| 019 |
HRS6M - HRS6M |
18" |
£39 |
| 041 |
Tajimi 12M - 12F umbilical |
10 metres |
£100 |
| 042 |
3.5mm minijack - BNC + XLR3F
Walkman Time Code |
|
£49 |
| 043 |
3.5mm minijack - BNC + HRS6M
Walkman Time Code |
|
£59 |
| 044 |
3.5mm minijack - HRS6M Walkman |
|
£35 |
| MICROPHONE
CABLES |
| 021 |
XLR3M - XLR3F starquad |
2 metres |
£20 |
| 020 |
XLR3M - XLR3F starquad |
4 metres |
£22 |
| 022 |
XLR3M - XLR3F starquad |
10 metres |
£30 |
| 501 |
XLR5M - XLR5F short flexible
tail |
0.5 metres |
£30 |
| 503 |
XLR5F - 2 x XLR3M splitter |
0.3 metres |
£40 |
| 505 |
XLR5M - XLR5F stereo |
2 metres |
£23 |
| 506 |
XLR5M - XLR5F stereo |
4 metres |
£24 |
| 504 |
XLR5M - XLR5F stereo |
10 metres |
£35 |
| LEMO
16 PIN CABLES (BBC NCA STANDARD) |
| 031 |
Umbilical male - male |
3 metres |
£105 |
| 032 |
Umbilical male - male |
5 metres |
£112 |
| 033 |
Tail BVW 300/400 R/A 3.5mm
jack |
|
£110 |
| CAMERA
TAILS |
| 016 |
XLR7F - 2 x XLR3M + feedback |
|
£59 |
| 017 |
HRS10M - 2 x XLR3M + feedback |
|
£59 |
| 040 |
Tajimi 12M - 2 x XLR3M +
feedback |
|
£82 |
Standard
version Camera Tails have R/A 3.5mm jack feedback. DigiBeta
version Camera Tails have XLR3F or XLR5F feedback. SX
version Camera Tails have XLR5F feedback. Add
£4 to the price for the XLR3F version. Add
£7 to the price for the XLR5F versions. Add
£10 for Video. |
| MISCELLANEOUS |
| 010 |
BNC - XLR3M |
18" |
£20 |
| 012 |
BNC - BNC |
18" |
£15 |
| |
SPECIAL CABLES TO ORDER |
|
POA |
Back to top
|
AN IMPORTANT NOTE
ABOUT CABLE REPAIRS:
For a number of
years we have repaired cables at greatly subsidised
prices. Unfortunately, we cannot continue to do
so. Please be aware that there must now be a minimum
charge of £20 for cable repairs. |
 |
We provide Hirose 10 pin umbilicals and
tails. All our umbilicals now carry video as standard. |
|
 |
We build and repair cables using these 16 pin
Lemo connectors. Did you know the assembly tool alone costs over
£300? |
| |
|
|
|
|
 |
This is the Tajimi 12 pin connector for the
latest SQN mixer. |
|
 |
We can supply new Lemo umbilicals and
tails - any length. |
| |
|
|
|
|
 |
Don't get in a flap trying to wire one of
these 20 pin feedback plugs for the Beta adaptor. Let us do it for
you! |
|
 |
The PP3 Clip Adaptor for powering your Time
Code TX where no power is available. |
| |
|
|
|
|
 |
This is the BNC - XLR3M cable for Time Code. |
|
 |
XLR extension leads and microphone cables. |
